Лесно Разградими Фибри за Цимент и Гипсови Мазилки B-STRATOS 0,350 kg

• Reduced weight and easy to lay
• Resistance against chemicals higher than steel (acids, bases, salts, etc.)
• Resistant to grounds in cement
• Do not oxidize and do not rust
• Insulating properties against moisture
• High tensile strength
• Low coefficient of elasticity
• Acts as a plasticizer and reduces the appearance of cracks in the base

! The product does not replace formwork or structural mesh

Add a bag of 0.350 kg in 1 m³ concrete. It is incorporated as an external component by tempering. Mix dry for 2 - 4 min, then add to water or to already prepared concrete or cement mix. Add the fibers to the concrete mixer and mix for 4 - 6 min. at a speed of 12 rmp to obtain a homogeneous mixture.

• In cementitious coatings to reduce shrinkage cracking of the substrate
• As a strengthening material in gypsum plasters, reducing their cracking and their mechanical resistance
• In dry mortar

• Three-dimensional reinforcement of cement and gypsum plasters and screeds
• Strongly reduces the cracks formed when the material shrinks
• Increase tensile strength and impact resistance and ductility.
• Increases mechanical resistance in general
• Reduces substrate absorption and the passage of water through it
• Increases resistance to freeze/thaw cycles
• Increases the strength of cement and gypsum
• Improves the aesthetic appearance of the substrate
• Even fibre distribution
• It allows less water addition to the mixtures as excess can lead to segregations.

B-STRATOS 6 is delivered in 0,350 kg bags. It should be stored in clean and dry places, under cover.