Безцветно противоплъзгащо покритие за бетон и подове TECMA ANTIDESLIZANTE

TECMA ANTIDESLIZANTE slip-resistant coating for concrete is recommended specifically for processing floors in:

• Residential buildings : bathrooms, toilets, showers, etc.
• Floors of industrial buildings and facilities
• Swimming pools, etc.
• Concrete floors
• Swimming pools, terraces and fountains

For slippery flooring materials such as tiles, ceramics, sandstone, granite, marble, mosaic, porcelain, cement, natural stone, etc., which become very slippery when cleaned with water-based products for aesthetic reasons.

TECMA ANTIDESLIZANTE for cleaning floors, is used undiluted. The method of application depends on the surface to be treated. Its application by professionals is easy and fast.

• After cleaning and allowing the surface to dry, pour the cleaner into a low pressure sprayer and spray the surface. Allow the product to work for about 5 min. and then with a rubber brush, spread evenly over the entire surface.
• Leave the product on for about 10-20 min. (depending on the type of surface and the pre-test made, as well as the material from which the floor is made).
• After this time, remove the product from the surface with plenty of water without brushing, changing the water frequently (wash several times).
• Allow to dry naturally. Once dry, the floor is ready to use.

Consumption rate of anti-slip coating for concrete:

Depending on the type of surface and its resistance to similar materials, the consumption rate may vary. An average consumption rate is 3-6 m²/l. With laboratory or field tests, accurate cost rate calculations can be made.

If you need to step into the preparation while it is still fresh to spread over the entire surface with a feather, take into account that it is particularly slippery while fresh. If, after stepping in the detergent and afterwards, you go to places that are dry, clean your shoes thoroughly with water and a cloth or change your shoes to avoid leaving traces of the detergent behind.

Use with good ventilation, gloves and protective clothing while applying the product. When applying indoors, open all doors and windows to ventilate the room. When treating kitchens or rooms with aluminum, glass or stainless steel, protect these items with plastic or PVC sheeting.

If you need an anti-slip coating for concrete in colour, you can use TECMA PAV 13

Due to the high acidity of TECMA ANTIDESLIZANTE, any contact with the product should be avoided. It is necessary to protect the skin with protective clothing and the eyes with goggles, gloves or face mask, rubber boots and acid-resistant clothing. Do not swallow. Keep away from children. Very toxic to inhalation. May cause burns. Read leaflet carefully before use.

TECMA ANTIDESLIZANTE anti-slip coating for concrete and floors is supplied in 5 and 10 litre plastic containers, non-reusable. It should be kept in well sealed containers, out of the way of alkaline products due to its incompatibility.

• Quick and easy when laying
• Colourless anti-slip coating
• Has strong anti-slip properties
• Solves various problems caused by smooth surfaces

Visible and long-lasting effect on treated surfaces

Our information and recommendations should be interpreted without legal obligation. It is the customer's responsibility to verify the suitability of the products for their intended purposes.