Антиграфити Прозрачно Покритие за Защита от Графити

• Effective protection against graffiti scratches.
• Protects the surface from dirt. The coating can be washed with soap and water and also removes grease, dust, ash, etc. that adhere to surfaces from the environment.
• Removes graffiti with ease when sprayed and rubbed with TECMA SOL AP.
• Easy to apply with brush, wool roller or gun.

Surfaces must be dry and free of grease, oil, dust or other contaminants. Surfaces that are not porous should be mechanically or chemically roughened with our DESCA-2Frinsed well with water after application to remove any particles from the porduct.

On rough surfaces such as cement, brick, concrete, artificial stone, etc., it is necessary to prime with ANTIGRAFFITI CASE. Then apply 1 or 2 coats of TECMA PAINT ® ANTIGRAFFITI antigraphite coating, depending on the surface roughness.

To avoid discoloration of the base, instead ANTIGRAFFITI CASE, apply a coat of IMPRIMACION A and then apply TECMA PAINT ® ANTIGRAFFITI.

Here you can see a video, how can you apply an anti-graffiti coating with a gun

Do not apply antigraffiti under the following conditions:

• If the temperature is below +10⁰С
• When the relative humidity is above 80% or is less than 3⁰C below dew point
• On very rough surfaces, discolouration may occur. To avoid this it is necessary to pre-prime with ANTIGRAFFITI CASE or IMPRIMACION A . It is a good idea to do a test in a hidden place beforehand.
• To remove graffiti, use TECMA SOL AP at least 7 days after laying TECMA PAINT ® ANTIGRAFFITI
• It is very important that the surface is completely dry, without moisture in the pores before application. The presence of moisture during application may cause the coating to fail.

Metal boxes 9 kg (base + hardener).

The consumption rate is calculated according to a formula without taking into account the porosity of the surface, the method of application, losses during application, weather conditions, etc.