Гел за Премахване на Боя, Лак и Графити DECAPA SCM GEL

DECAPA SCM GEL gel paint remover, can be used undiluted or diluted with water. Diluting it may reduce the viscosity of the product and its likelihood of slumping. When used on vertical surfaces. Depending on the type and thickness of the paint, it may be diluted as much as 50% with water.

In the case of paints that have formed a film by chemical reaction, such as epoxy or polyurethane, it is recommended to apply the undiluted product. Layered acrylic paints, synthetic enamels, chlorinated rubber, vinyl, the product can be diluted with water in the correct ratio. Depending on the results of a previously made test.

Put DECAPA SCM GEL graffiti cleaner, on the surface with a layer of 1-2 mm, using a brush or roller resistant to the product. Allow to work from 5 minutes to several hours, depending on the paint and the thickness and temperature (at lower temperatures, the action time is longer). The product will begin to blister and soften the paint, and can then be removed with a putty knife or pressurized water.

When using the product in confined spaces or rooms with poor ventilation, make sure all doors and windows are open and make sure to ventilate the room as much as possible. The product is flammable and therefore the necessary precautions for using this type of product should be observed.

В случай че имате нужда да премахнете графити и боя от гладки повърхности, вместо гел за премахване на боя, може да използвате JV-CLEAN spray.

You can see a suitable video for removing paint from hungry surfaces here.

Paint remover gel is a highly flammable product. Do not apply in the presence of flames, sources of fire, or appliances likely to spark, etc.