Продукт на Битумна Емулсия с Латекс TECMA PAINT BITUM CAUCHO

Treatment against moisture and waterproofing of vertical walls and surfaces that will be underground. For the primary treatment of surfaces that will subsequently be covered with asphalt coating or asphalt products.

TECMA PAINT BITUMEN CAUCHO can be applied by brush, roller or airless gun. The surface must be clean and free of any unusual materials, dust , sand, etc. It can be applied on damp surfaces but without spills. When applied to highly absorbent surfaces or in very hot weather, it is advisable to wet the surface, but without puddles, to avoid evaporation of water from the emulsion, which would lead to the formation of an uneven coating.

When waterproofing, it is advisable to apply several coats and saturate all holes and pores until a consumption rate of 1 kg/m is reached.².

Before applying the next coating, the previous one must be completely dry. If used for the initial treatment of surfaces to be coated with asphalt-based products, it should be thinned with 10-20% to produce a uniform coating that will adhere better into the pores of the substrate on which it is being applied.

• Apply at temperatures between +5⁰C and +30⁰С
• Do not apply when rain is expected
• Use water to clean the tools before the product dries.
• Stir the product before use until a homogeneous mixture is obtained.

Store at room temperature between +5⁰C and +30⁰C, in frost-protected rooms.

TECMA PAINT BITUMEN CAUCHO is supplied in metal containers of 25 kg.

Our information and recommendations should be interpreted without legal obligation. It is the customer's responsibility to verify the suitability of the products for their intended purposes.

• Good adhesion to wet and dry surfaces
• The coating is waterproof, does not crack from cold or heat flows. It is very flexible and resistant to salt water.
• Not combustible