Отстранител на Ръждиви Петна от Гранит, Керамика и Много Други Видове Естествен Камък SUPER DESCA STONE

• Oily-liquid consistency
• Colourless to pale yellowish brown
• Foams slightly on contact with the substrate
• Contains no chlorides or sulphates
• Does not release money under normal usage conditions
• Strong concentrate, allows to be highly diluted according to its application

• For cleaning rust stains on mineral surfaces, vertical and horizontal, such as facades, floors, monuments, monuments in gardens, etc.
• In the industry when cutting and preparing natural stone (granite, marble, etc.)
• In the treatment of stone with metal tools (such as pyrite, pyrrhotite (magnetic pyrites), marcasite, magnetite, etc.) embedded in natural stones of non-dark colors.

SUPER-DESCA STONE due to its strong concentrated composition can be used, depending on the application, pure or diluted with water in which it is completely soluble.

It is recommended that its use occurs at room temperature, although it does not off-gas at higher temperatures.

SUPER-DESCA STONE depending on its application, can be applied with a brush, roller, gun or cloth.

To decide how to dilute the product, you need to pay attention to how dirty the substrate you want to treat is and its acid resistance (it is important to know what the acid resistance of the stone is to know whether to dilute the product or not, as an example - granite is much more acid-repellent compared to marble). Highly resistant materials require the use of the product as a concentrate. In case you need to remove rust from highly polished surfaces without damaging the surface, you should use 1 part SUPER-DESCA STONE and 3 to 10 parts waterby starting a surface test with a stronger dilution of the product. Sometimes it is convenient, when the substrate is polished and is poorly resistant to acids, to pre-wet the substrate and then apply the product. When you have large areas to treat it is better to apply the product with a brush or roller as an impregnant; and when using it for small areas, apply with a rag soaked with SUPER-BOARD STONE.

Brush the product over the entire surface and leave it to work. Generally for surfaces with rust, you can let it act from 10 to 30 min.

Once the product's dwell time is over, check the rust removal to see if it is happening, then clean the entire surface thoroughly with water, brushing at the same time to remove any product residue. If in case there is still rust residue due to the depth of the pores and the strength of the contamination, you can repeat the process more than once. We advise you to do preliminary tests before proceeding to use.

The consumption rate depends on the surface to be treated and the dilution of the product, as a guide we can give 5 - 15 m²/l. We recommend that you protect the surface you are cleaning from dirt and moisture with our water repellent products HUM-PROT MATE or IMPERMEABILIZANTE 10AG or coated with our polyurethane aliphatic varnish TECMA PAINT BPU.

Corrosive. Do not swallow. Keep away from children. Avoid contact with eyes, skin and mucous membranes. Wear protective gloves. In case of skin contact, wash thoroughly with water. In case of eye contact, rinse thoroughly with water and seek medical attention.

SUPER-DESCA STONE is supplied in non-reusable plastic containers of 6, 12, 30 and 72 kg.

• Does not emit harmful odours and gases
• Can be applied to a wide range of surfaces
• Very strong in removing iron oxides
• Concentrate. Allows for very high dilution depending on contamination and substrate