Препарат за Отстраняване на Ръжда и Котлен Камък, без Студени Пари SUPER-DESCA

* Liquid with an oily consistency.
* Colorless to light yellow-brown.
* Contains no chlorides or sulfates.
* Contains limiters of aggression to metal surfaces.
* Does not damage rubber and most plastics.
* Does not form vapors when used cold.
* Concentrated product, allows strong dilution depending on use.
* Slightly foams when cold.

SUPER-DESCA can be used by dipping, drilling or spraying depending on the type of operation, with dipping being the most recommended.
It is generally recommended to use it cold, although heating it slightly to 40- 50oC improves cleaning operations and reduces immersion time.

Once the treatment is complete, rinse thoroughly with pressurized water and continue with
protection of the treated parts by coating, e.g. paint, or corrosion protectors, such as our corrosion protectors like our MECA-PROT.
In cases where good rinsing is not possible, neutralize residual acid with alkaline products. The use of SUPER-DESCA in the cleaning of formwork webs, without the need to scrape and grind the sheets by mechanical means, which is so tedious and uneconomical.

The best and easiest way to use is by dipping, which allows simultaneous cleaning of both sides, eliminating incrustations of cement residue and any possible oxidation that may happen during use in the formwork and facilitates the adhesion of the concrete.

Before using the product, check the product safety data sheet.

Store the product in a dry place, protected from external influences, at a temperature between 5 to 30ºC, in airtight containers. Under these conditions the product can be stored for at least three years.