Полиуретанов Еластичен Уплътнител за Фуги SATECMA ELASTIC S 600
Satecma Elastic S-600
Polyurethane elastic sealant designed for sealing joints and cracks in the structural elements of buildings. It is a specific product for performing sealing works in construction, which offers the best sealing, sealing and elastic characteristics for both indoors and outdoors.
SATECMA ELASTIC S-600 is packed in a 600 ml aluminium foil. SATECMA ELASTIC S-600 retains constant flexibility over time, has excellent resistance to ageing and is not sensitive to corrosive environments.
- Опаковки — 600 мл.
- Colours — Сив
Технически лист
ВСИЧКО ЗА SATECMA ELASTIC S 600
Пълната информация от техническата спецификация на производителя — приложение, подготовка на основата, употреба и технически данни.
Annex
SATECMA ELASTIC S-600 is recommended for sealing masonry, expansion joints, joints in pre-cast elements. It is also used for sealing joints in wood and metal frames, joints in aluminum, crack repair, etc.
In case you need a polyurethane-based waterproofing finish, you can use our TECMA IMPERAL P-91
В this video you can see, how to repair expansion joint with polyurethane sealant and rope.
References
Recommendations when applying elastic joint sealant
- Do not apply at temperatures below +50C and relative humidity above 80%
- Do not apply to wet or damp surfaces
If possible, study the base to be laid : compression, extension, bonding, etc. before laying. Due to the wide variety of materials and their porosity, it is advisable to do a test first to see if you will need to use a primer before application.
Packaging
Aluminium fillers 600 ml. Storage in a cool dry place, with sealed fillers in these conditions can be stored for 10-12 months.
Advantages
- Constant elasticity
- High quality sealant
- Highly resistant against corrosive environment
- Elastic joint sealant
Technical Data
| Density | 1,18 gr/cc |
| Hardness Shore A | About 20 |
| Fluidity | None |
| Extension to break | > 410% |
| Elastic module at 100% | 0,37 MPa |
| Elasticity after work | > 90% |
| Operating temperature | -300C to +800С |
| Temperature for laying | +50C to +450С |
| Dry to the touch at 230C and 50% O.V | 1 h |
| Polymerizing | 5 to 10 mm after 24 h, depending on weather conditions |
| Maximum acceptable base movement | 25% |
| Colours | White and Grey |
Полиуретанов Еластичен Уплътнител за Фуги
ОБЕКТИ, ИЗПЪЛНЕНИ СЪС СИСТЕМИТЕ НА SATECMA
Проектираме, доставяме и полагаме със собствени бригади — с писмена гаранция за изпълнението. Разкажете ни за вашия обект.
НЕ СТЕ СИГУРНИ ДАЛИ ТОВА Е ПРАВИЛНИЯТ ПРОДУКТ?
Опишете ни обекта — нашите техници ще потвърдят продукта, разходната норма и начина на полагане, безплатно и обикновено до 1 работен ден.
Още продукти от категория „Полиуретанова хидроизолация“ — подбрани така, че да работят заедно в една система: подготовка, полагане и защита с материали от един производител.
One-part Polyurethane Waterproofing Agent - TECMA IMPERAL P 2008
Finishing Paint for Polyurethane Waterproofing Coatings - TECMA PAINT FINAL
Flexible Transparent Waterproofing - TECMA PAINT IT
Waterproofing Base of Plasticized Resins - IMPERMEABILIZANTE E 88
Fiberglass Reinforcing Mesh - FIBRE DE ARMAR 100
Polyurethane Elastic Sealant in Mastic - SATECMA ELASTIC PM 33
Polyurethane Waterproofing with Aluminium Colour - TECMA IMPERAL P 91
Еластичен Уплътнител за Влажни Повърхности – SATECMA ELASTIC H2O
Colourless Protective Polyurethane Varnish - TECMA PAINT BPU
Transparent Waterproofing for Special Areas - TECMA ECO-TR
Иновативните и висококачествени решения
СВЪРЖЕТЕ СЕ С НАС
Търсите надеждно и естетично решение за вашия обект? Обадете ни се още днес — ще изготвим безплатна консултация и оферта, съобразена с вашите конкретни изисквания.