Завършваща Боя за Полиуретанови Хидроизолационни Покрития TECMA PAINT FINAL

As a final protective layer against solar radiation on polyurethane waterproofing coatings applied on roofs and terraces.

Surfaces must be dry and free of grease, fat, dust and other dirt. The polyurethane waterproofing coating shall not be excessively tacky.

• Remove the components from the container.
• Apply a coat at a rate of 7-9 kg/m² by spreading it with a brush or roller. The applied coating should not be very thick. In case there will be more intensive traffic on the surface, it is advisable to lay a second coat, with an interval of 12 h between applications.

We advise to apply the paint a day after the polyurethane waterproofing coating for better adhesion.

• Do not apply at temperatures below +10⁰C, or relative humidity above 90%
• Do not apply if rain, snow, or freezing of the substrate is expected within 6 h after application.
• Used tools and utensils are washed with water
• Possibility of human trafficking after 48 h at +20⁰C, following the same guidelines as for the transit of flexible polyurethane, rubber-soled shoes with no sharp parts on them.

TECMA PAINT FINAL is available in plastic containers of 10 and 25 kg. The product can be stored for 1 year in original sealed containers, protected from freezing and high temperatures indoors.

Our information and recommendations should be interpreted without legal obligation. It is the customer's responsibility to verify the suitability of the products for their intended purposes.