
Чист епоксиден грунд подходящ за разреждане с вода, който е разработен за защита на минерални повърхности или за грундиране преди нанасянето на TECMA PAINT ECOPOX.
Технически лист
Пълната информация от техническата спецификация на производителя — приложение, подготовка на основата, употреба и технически данни.
Технически лист и документи
As a coating on mineral and cement-based surfaces, which can subsequently be treated with water-based epoxy coatings such as TECMA PAINT ECOPOX, or as an anti-dust varnish for concrete floors in industrial buildings, warehouses, etc.
The surface must be dry and free from grease, oil , dust , free solutions etc. Cement or concrete surfaces must be completely dry and the product must not be applied to them until at least 28 days have elapsed since the cement or concrete was laid. Smooth and non-porous surfaces should be mechanically or chemically roughened with our DESCA 2Fwhich is then rinsed thoroughly with water to remove any residue of the product.
The product acts as a binder in the compaction of stones, aggregates and small stones in horticulture and in these cases the product is mixed with 35-60% water with a stirrer or by spraying the product, and the application of a thicker layer should be avoided so as not to delay the drying of the product. After mixing, all tools should be immediately cleaned with water until all product residue is removed.
In 7 kg kits (base + hardener) pre-dosed for use. Keep containers tightly closed at temperatures between +50C and +300С. Store in locations that are protected from freezing. Under these conditions, the shelf life is at least 1 year.
Our information and recommendations should be interpreted without legal obligation. It is the customer's responsibility to verify the suitability of the products for their intended purposes.
| Nature | Epoxy |
| Appearance | Glanz |
| Components | Two |
| Proportions of the mixture | 2 parts base and 1 part hardener |
| Durability of the mixture at +230С | 2 hours |
| Drying time at +230C and 55% relative humidity | Per touch : 7 h. Hard : 20 h. Reapplication : min. 16 h. max. 72 h. |
| Tools for laying | Brush, roller, gun |
| Diluent | Water |
| Cost rate | 7 m2/kg at 50µm dry film thickness |
Прозрачен Епоксиден Грунд на Водна Основа за Подови Настилки
Продуктът е част от системи, които сами проектираме и полагаме. Вижте как работи на място — и ни разкажете за вашия обект.



Опишете ни обекта — нашите техници ще потвърдят продукта, разходната норма и начина на полагане, безплатно и обикновено до 1 работен ден.
Още продукти от категория „Епоксидни покрития“ — подбрани така, че да работят заедно в една система: подготовка, полагане и защита с материали от един производител.




















Иновативните и висококачествени решения
Търсите надеждно и естетично решение за вашия обект? Обадете ни се още днес — ще изготвим безплатна консултация и оферта, съобразена с вашите конкретни изисквания.
This site uses cookies to improve your experience. Please select which types of cookies you wish to accept. For more information, see our Privacy Policy .