Течна Гума за Мокри Повърхности – TECMA IMPERAL H2O

Течна Гума за Мокри Повърхности TECMA IMPERAL H2O

Flexible liquid rubber based on state-of-the-art polyethers, which forms a flexible and  водоустойчива мембрана с висока ефективност. Полиуретановото покритие е проектирано така, че да решава локални спешни случаи на при течове на вода и хидроизолиране, както и за цялостна хидроизолация на тераси, покриви, балкони и др. Той е устойчив на стояща вода.

  • Опаковки — 1 килограм · 5 килограма

Технически лист

ВСИЧКО ЗА TECMA IMPERAL H2O

Пълната информация от техническата спецификация на производителя — приложение, подготовка на основата, употреба и технически данни.

Description

What is Liquid Rubber for Wet Surfaces

  • Recommended for repair and waterproofing of cracks in roofs and walls, areas of moisture penetration in roofs and gutters, complete waterproofing of roof coverings and terraces.
  • Constant elasticity
  •  No surface stickiness on curing
  •  Wet bonding
  •   Very good adhesion, no primer required, on concrete and mortar, brick, steel, tile, glass, galvanized steel, aluminum.
  •   Adhesion even when applied under water on non-porous surfaces
  •   Filling of cracks thanks to the paste-like consistency of the product.
Preparation

Surfaces must be hard and free of grease, oil, sand, dust, loose material or other contaminants. The surface may be wet but must be perfectly clean. When rehabilitating old waterproofing products, the surface shall be washed to remove any remaining dirt, then allowed to dry completely.

You can make adjustments and repairs to surfaces with SATECMA ELASTIC S 600

Here you can see a video how you can similarly use liquid rubber for wet surfaces.

Usage

How to use polyurethane waterproofing for wet surfaces

Once the surface has been prepared, apply two coats of the product in a homogeneous manner with a minimum consumption of 0.7 kg/m2 per coat. The second coat should not be applied until the first coat has cured, at least 6 hours at 23ºC.

To make the waterproofing resistant to foot traffic, apply a first layer of 0.9 kg/m2 by placing a mesh or veil of reinforcement and then apply another layer like the first.

References
  • It is very important to apply a flexible liquid rubber with the specified cost for good performance of the waterproofing.
  • The containers must be airtight to prevent the product from hardening on top.
  • Do not apply in case of traces of dirt, grease or oil.
  • To clean the product without hardening, use TECMASOL D. If the product has hardened, cleaning must be carried out mechanically.
Packaging

Liquid rubber for wet surfaces TECMA IMPERAL H2O is available in packs of 1 and 5 kg. Store in a dry place at temperatures between 5 and 35ºC, with unopened containers, airtight. The product can thus be stored for at least 18 months.

Technical Data

Composition:

polyether

Density:

1.3±0.03 gr/c.c.

Elongation at break at 23oC UNE EN ISO 527-3:

250%

Tensile strength at 23oC UNE EN ISO 527-3:

1,4 MPa (N/mm2)

Alkali resistance:

60 days
Impermeability UNE 1928. Method B:

watertight

Recommended expense:

1.4 kg/m2, two coats.

Application:

Roller, brush

Drying time at 23oC, 55% R.H. :

6 hours for 1 mm thick layer.
Minimum repaint 8 hours.

Application temperature:

5o to 40oC

Temperature resistance :

- 40o до 90oC

Chemical resistance :

Resistant to aliphatic hydrocarbons dilute solutions of inorganic acids and alkalis, oils and fats.

Colours :

White, red terracotta, grey and black.

Видео · TECMA IMPERAL H2O

Течна Гума за Мокри Повърхности

ОБЕКТИ, ИЗПЪЛНЕНИ СЪС СИСТЕМИТЕ НА SATECMA

Проектираме, доставяме и полагаме със собствени бригади — с писмена гаранция за изпълнението. Разкажете ни за вашия обект.

ИЗПРАТЕТЕ ЗАПИТВАНЕ
5/5 ★★★★★На база 60+ ревюта в Google

НЕ СТЕ СИГУРНИ ДАЛИ ТОВА Е ПРАВИЛНИЯТ ПРОДУКТ?

Опишете ни обекта — нашите техници ще потвърдят продукта, разходната норма и начина на полагане, безплатно и обикновено до 1 работен ден.

Още продукти от категория „Полиуретанова хидроизолация“ — подбрани така, че да работят заедно в една система: подготовка, полагане и защита с материали от един производител.

Иновативните и висококачествени решения

СВЪРЖЕТЕ СЕ С НАС

Търсите надеждно и естетично решение за вашия обект? Обадете ни се още днес — ще изготвим безплатна консултация и оферта, съобразена с вашите конкретни изисквания.

СВЪРЖЕТЕ СЕ С НАС ДНЕС