Светлоотразителна Боя за Пътна Маркировка TECMA PAINT OPS

Surface preparation before application of road marking paint

Surfaces must be dry and free of grease, oil, dust and other contaminants.

When applying over polished concrete, we recommend to roughen the surface mechanically or chemically with our DESCA 2F, then rinse thoroughly with water to remove any traces of product.

Use of road marking paint

• Shake the product well before application.
• When laying over cement or concrete it is necessary to thin the first coat with 10-15% TECMASOL Cto achieve better bonding of the product to the substrate.
• In the case of asphalt bases, it can be laid without thinning.
• When applying subsequent coats, always observe the drying time of the previous coat.
• The paint does not need to be thinned.

In this video you can see road marking by machine and spraying of glass microspheres.

• Lay with good ventilation, paint road markings
• Do not expose to heat or direct fire. Product is flammable
• Avoid product contact with skin or eyes

In 15 and 30 kg metal buckets.

Our information and recommendations should be interpreted without legal obligation. It is the customer's responsibility to verify the suitability of the products for their intended purposes.